Mercury 60 4-Stroke User Manual

MAINTENANCE
85
Checking Power Trim Fluid
1. Tilt the outboard to the full up position and engage the tilt
support lock.
28474
2. Remove the fill cap and check the fluid level. The fluid level
should be even with the bottom of the fill hole. Add Quicksilver
or Mercury Precision Lubricants Power Trim & Steering Fluid.
If not available, use automotive (ATF) automatic transmission
fluid.
28476
Tube Ref No. Description Where Used Part No.
114
Power Trim and
Steering Fluid
Power trim reservoir
92-858074K0
1
Changing Engine Oil
ENGINE OIL CAPACITY
Capacity Fluid Type
Engine oil
3.0 Liter
(3 U.S. Quarts)
Mercury Precision Parts or Quicksilver Synthetic
Blend 25W‑40 4‑Stroke Outboard Oil
Mercury Precision Parts or Quicksilver 10W‑30
4‑Stroke Outboard Oil
OIL CHANGING PROCEDURE
1. Tilt the outboard up to the trailer position.

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty