Mercury 60 4-Stroke User Manual

OUTBOARD INSTALLATION
110
!
WARNING
Improper fasteners or improper installation procedures can result
in loosening or disengagement of the steering link rod. This can
cause a sudden, unexpected loss of boat control, resulting
serious injury or death due to occupants being thrown within or
out of the boat. Always use required components and follow
instructions and torque procedures.
a
c
b
28479
f
d
e
a - Special washer head bolt (10‑856680)
b - Nylon insert locknut (11‑826709113)
c - Spacer (12‑71970)
d - Flat washer (2)
e - Nylon insert locknut (11‑826709113)
f - Use middle hole ‑ steer outboard to the side to gain hole
access
Description Nm lb. in. lb. ft.
Special washer head bolt 27 20

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty