Mercury 60 4-Stroke User Manual

OPERATION
54
3. Set the lanyard stop switch to "RUN" position. Refer to
General Information ‑ Lanyard Stop Switch.
19791
4. Shift outboard to neutral ("N") position.
N
26838
5. Move the throttle‑only lever to the fully closed position or press
the throttle‑only button.
a
b
a
b
26840
a - Fully closed position
b - Maximum fast idle speed position
6. Starting a flooded engine ‑ Advance the throttle‑only lever or
control handle to the maximum throttle‑only position and
continue to crank the engine for starting. Immediately reduce
engine speed after engine starts.

Mercury 60 4-Stroke Specifications

General

Engine Type	4-Stroke
Horsepower	60 hp
Displacement	995 cc
Fuel System	Electronic Fuel Injection (EFI)
Alternator Output	18 amp / 226 watt
Starting	Electric
Cylinders	4 (inline)
Shaft Length	20" or 25"
Full Throttle RPM Range	5000-6000
Warranty	3-Year Limited Warranty