GASOLINE STERNDRIVE INSTALLATION MANUAL
90-860172011 Page 29 of 137
IMPORTANT: Slight feedback in the steering system could be encountered if the
cable guide tube flat surfaces are not positioned vertically.
11. Using a suitable wrench hold the flat surfaces on the cable guide tube in the vertical posi-
tion. Torque coupler nut. Be certain the flat surfaces are still aligned vertically after
torque is applied to coupler nut.
Description
Nm lb-in. lb-ft
Coupler Nut 47 35
CAUTION
Steering cable outer casing must be free to move back and forth for steering system
to function properly. Do not fasten any items to steering cable.
To Next Page
Loading...
