Section 3 - On the Water
Page 68 90-899883295 JUNE 2008
!
WARNING
In some Precision Pilot modes—"Auto Heading," "Track Waypoint," and "Waypoint
Sequence"—the boat navigates a preset course. The boat does not automatically
respond to hazards such as other watercraft, obstacles, swimmers, or underwater terrain.
Collision with these hazards could cause boat damage, serious injury, or death. The
operator must stay at the helm, ready to evade hazards and warn others of course
changes.
6. Press the enter button to acknowledge it is OK to turn. The enter button is in the upper
right corner of VesselView and has a check mark symbol. Once acknowledged, Axius
Premier touchpad tracks to the next waypoint in the route.
7. Stay alert; the boat turns automatically in this mode. The operator must know if it is
safe to turn when the vessel is entering a waypoint arrival zone. Inform passengers
that the boat automatically turns so they can be prepared.
Waypoint acknowledge screen
8. If you are not in a previously set waypoint arrival zone, "WAYPOINT SEQUENCE"
mode starts auto sequencing to the waypoints in the route. Acknowledge that you
understand the information presented by the pop‑up screen warning and press the
enter button—the button with a check mark symbol.
Pop‑up screen warning
To Next Page
Loading...
Need help?
General
