MONITOR 1.01-1.02
1-6
MONITOR – VERSION 1.01-1.02
Shallow Water Alarm
You can set an alarm to trigger whenever the boat moves into water
shallower than the alarm level.
Setting Shallow Water Alarm.
1. The water depth screen must be displayed. Be sure Depth is
turned on in CAL 2. Refer to CAL 2 Calibration Section.
2. Press both
and buttons together for 3 seconds.
3. The alarm on or off menu will appear.
4. Press the
button to toggle to ON.
5. Push button to save.
6. The depth number will be flashing. Press the
button to set
the flashing number to desired alarm depth. 100 ft maximum
depth and 2 ft minimum depth.
7. Push button to save.
To Next Page
Loading...
Need help?
General
