Mercury SMARTCRAFT - Standard Information Display Screens

MONITOR 1.01-1.02
1-3
MONITOR – VERSION 1.01-1.02
Standard Information Display Screens

   
Initial Power Up
At power up, a momentary (1
second) screen displays the
current monitor software ver-
sion, followed by a 4 second dis-
play showing hours of engine
use.

Fuel Used
Displays approximate fuel used
since the last reset. Reset will
return display back to 0.
You can Reset anytime by
pressing and
buttons together momentarily.

Engine RPM
Tachometer – Displays engine
speed in Revolutions Per Min-
ute (RPM).

Fuel Flow
Displays current estimated indi-
vidual engine fuel consumption
in Gallons per hour (Gal/hr) or
Liters per hour (Ltr/hr).