8
300Mbps Whole Home Mesh Wi-Fi System
Halo S3
4.2 Device Management
You can manage both connected and blocked devices on this page.
4.2.1 Connected Devices
• Device: Displays the name of connected device.
• IP Address: Displays the IP address of connected device.
• Rate: Displays the transmission rate.
• Upstream: Click Edit to limit the upstream rate of connected device.
• Downstream: Click Edit to limit the downstream rate of connected device.
Note: To cancel speed limit, enter 0 or leave the eld blank, then click Save.
• Operation: Click Edit to set the name and transmission rate of the connected
device. Click Block to block the device from accessing the network.
4.2.2 Blocked Devices
• Device: Displays the name of blocked device.
• MAC Address: Displays the MAC address of blocked device.
• Operation: Click Unblock to allow the device to access the network.
4.3 Network
4.3.1 WAN Settings
Go to Network > WAN Settings, you can congure the IP parameters of the WAN.
If you don't know how to choose the appropriate connection type, click the Detect
button to allow the main router to automatically search your Internet connection for
servers and protocols.
Note:
The connection type will be reported when an active Internet service is successfully detected by the router. This
report is for your reference only.
To make sure the connection type your ISP provides, please refer to the ISP. The
various types of Internet connections that the router can detect are as PPPoE,
Dynamic IP, and Static IP.
To Next Page
Loading...
Need help?
General
