Mercusys Halo S3 User Manual

23
300Mbps Whole Home Mesh Wi-Fi System
Halo S3
5.4 IPv6
5.4.1 IPv6 Status
The IPv6 Status page displays the Router's current IPv6 status.
WAN
• Connection Type - The IPv6 connection way for WAN.
• Connection Status - The status of IPv6 connection.
• IPv6 Address - The WAN IPv6 address.
• IPv6 Default Gateway - The router's default gateway.
• Primary IPv6 DNS - The primary IPv6 DNS address.
• Secondary IPv6 DNS - The secondary IPv6 DNS address.
LAN
• IPv6 Address Type - The way how the router assign IPv6 address for PC in LAN,
SLAAC (Stateless address auto conguration) and DHCPv6(Dynamic Host Con-
guration Protocol for IPv6) Server.
• Prex Length - The site prex.
• IPv6 Address - The LAN global IPv6 address of the Router.
5.4.2 IPv6 WAN
Choosing the correct WAN connection type based on your ISP network topology.
• DHCPv6 - Connections which use dynamic IPv6 address assignment.
• Static IPv6 - Connections which use static IPv6 address assignment.
• PPPoEv6 - Connections which use PPPoEv6 that requires a user name and pass-
word.
• Tunnel 6to4 - Connections which use 6to4 address assignment.
• Enable/Disabled - Enable or disable all IPv6 connections.
5.4.3 IPv6 LAN
In this page you can congure LAN IPv6 interface for your router.
• Address Auto-Conguration Type: Select a type to assign IPv6 addresses to the
computers in your LAN. RADVD and DHCPv6 Server are provided.
• Site Prex Conguration Type - Select a type to assign IPv6 prex addresses to

Mercusys Halo S3 Specifications

General

Mesh Technology	Yes
MU-MIMO	Yes
Beamforming	Yes
Parental Controls	Yes
Guest Network	Yes
Frequency Band	2.4 GHz, 5 GHz
Wireless Security	WPA3