Mercusys Halo S3 User Manual

7
300Mbps Whole Home Mesh Wi-Fi System
Halo S3
Chapter 4 Congure the router
This chapter will show you how to congure and manage the basic features of your
mesh system.
4.1 Status
Choose Status, you can view WAN information and manage the paired Halo devices
in your mesh system on this page.
4.1.1 WAN Status
The following parameters displays the current settings of the WAN port. You can
congure them in the Network > WAN page.
• MAC Address - The physical address of the WAN port, as seen from the Internet.
• IP Address - The current WAN (Internet) IP Address. This eld will be blank or 0.0.0.0
if the IP Address is assigned dynamically and there is no connection to Internet.
• Subnet Mask - The subnet mask associated with the WAN IP Address.
• Default Gateway - The Gateway currently used by the router is shown here.
• DNS Server - The DNS (Domain Name System) Server IP addresses currently used
by the router. Multiple DNS IP settings are common. Usually, the rst available DNS
Server is used.
4.1.2 Device Status
You can view and manage paired Halo devices in your mesh system:
• Device - Displays the name of Halo device.
• Status - Displays the connection status of Halo device.
• IP Address - Displays the IP address of Halo device.
• MAC Address - Displays the MAC address of Halo device.
• Operation - Click Edit to set the name of Halo device. Click Remove to remove the
Halo device(except the main router) from your mesh network.
• Add Device - Add new Halo devices to expand your mesh network.

Mercusys Halo S3 Specifications

General

Mesh Technology	Yes
MU-MIMO	Yes
Beamforming	Yes
Parental Controls	Yes
Guest Network	Yes
Frequency Band	2.4 GHz, 5 GHz
Wireless Security	WPA3