Merrychef eikon e1s - Using a cooking profile - full serve mode

18
eikon e1s
User Manual
Section 2: Operations and Installation Guide
Using a cooking profile – full serve mode
1. Select the ‘cookbook’ symbol from the main menu screen and
then select a group of cooking profiles, for example ‘ITALIAN SUBS’,
to display the individual cooking profiles.
2. Select a cooking profile from the options available in the selected
group, for example ‘ITALIAN SUB x 2’.
3. Follow any instructions on the screen, if displayed.
Press the green tick to start the cooking process.
Note: If the product has not been placed in the oven, at this stage open
the oven door and place the food on the cook plate and then press the
green tick to start cooking.
Hot surfaces at the door and in the cavity.
4. The cooking time counts down for each programme stage.
When the cooking profile ends, a red bar is displayed usually with an
audible sound. Open the door or touch the red ‘X’ to return to the
cooking profile.
Hot surfaces at the door and in the cavity.
Note:
• To check the cavity temperature when cooking, lightly tap the
temperature displayed. The cavity temperature is shown with an
asterisk.
• Opening the appliance door during cooking stops the cooking
profile and displays a warning. Avoid opening the door during the
cooking process.
• Closing the door, however, allows the user to continue or cancel the
cooking profile.