eikon e1s
User Manual
Section 2: Operations and Installation Guide
1. Switch the appliance OFF and open the cover to the USB port on the
control panel at the.
2. Plug in the USB memory stick and switch on the oven.
Note: If the USB memory stick is too large, use a standard commercial
adapter cable.
3. Select the ‘USB’ symbol from the settings menu.
Note: Check that the memory stick has the correct number/code for the
programmes you want to load into the memory (one ‘.cbr’ file and
‘autoupdate’).
4. Select the type of file you are downloading (firmware or recipes). The
files will now automatically download from the USB memory stick
showing the progress and confirmation screens for the update.
IMPORTANT: Downloading from a USB memory stick will clear all the existing programmes in the memory of the
appliance.
The USB cover protects the USB port so that no water vapour can get into the control electronics. During cooking
and cleaning, there must not be a USB memory stick inserted and the USB port must be closed by the cover.
To Next Page
Loading...
