eikon e1s
User Manual
Section 2: Operations and Installation Guide
Stage 2: Apply oven protector (optional)
1. Spray Merrychef protector or a
Merrychef approved protector
onto a clean sponge.
2. Spread the protective chemical
lightly onto all internal surfaces,
avoiding the roof (jet plate) and
door seal.
3. Replace the cleaned and dried
cook plate.
4. Press the tick on the apply oven
protector screen to continue.
5. A prompt appears to clean the
air filter.
Stage 3: Clean the air filter and external surfaces
1. Remove the air filter by gently
pulling it.
2. Wipe the air filter clean or wash
in soapy water.
3. Dry and replace the air filter.
4. Press the green tick to confirm
cleaning of the air filter.
5. The oven switches OFF
automatically.
6. Wipe the external surfaces of the
oven with a damp cloth.
To Next Page
Loading...
