1 2 3
5 64
1 2 3
4 5
CHANGING THE OVEN 9.5
TEMPERATURE
1. Take note of the temperature required for the
recipe and select OK.
2. Select the temperature symbol.
3. An asterisk next to the number indicates the
present oven temperature, select the required oven
temperature for the recipe. Once the oven is at the
required temperature continue from selecting the
‘COOKBOOK’ in step 1.
4. Select the required cooking program to start
cooking.
For example, ‘1 BURGER’.
5. The program either starts immediately displaying
a countdown timer, or an instruction is displayed
rst; follow the stage instruction then select OK to
start cooking. If the oven door is not opened within
30 seconds a warning message appears.
6. The cooking timer counts down to zero and
makes a sound to indicate an operator action is
required at the end of a cooking stage or the end of
a cooking program.
Once the cooking program has nished, opening
the oven door to remove the food returns the
display to the ‘COOKBOOK’ screen.
Note; opening the oven door during cooking stops the
cooking program and displays a warning. Closing the
door allows the user to continue or cancel the cooking
program.
To check the oven temperature when cooking, lightly
tap the temperature displayed, the oven cavity
temperature is shown with an asterisk.
VIEWING & EDITING PROGRAMS9.6
1. Select ‘COOKBOOK’ from the main menu screen.
2. Select the ALL MENUS symbol.
3. Select ‘EDIT COOKBOOK’.
4. Use the up/down scroll arrows on the right side of
the screen to nd the cooking program, for example
1 BURGER and select the view/edit cooking program
symbol.
5. View or adjust the program as required, see
Development mode for details.
To Next Page
Loading...
Need help?
General
