16
Keyboard wedge
Keyboard Layout: The selecting of keyboard layout
supports many country languages other than USA
keyboard layout. First you need to confirm country
language that you desire. In DOS, using command “keyb”
to select the desirable keyboard layout or in WINDOWS
entry “Control” then pops “Keyboard” to select country at
“language” item. For details, please refer to your DOS or
WINDOWS user’s manual.
Keyboard Speed: By selecting, you can change output
speed of scanner to match with host computer. Generally,
set 00 or 01 in working high speed. If some output
characters of barcode have been lost, you may need to
set 05 or 06 to match your host keyboard speed.
Function Key: Set Enable, scanner can output code as
pressing function-key in your application program while
the barcode datas contain ASCII value between 01
16 to
1F
16. Refer to ASCII table.
Numeric Key: The Keypad has to be selected if your
application program is only keypad numeric code
acceptable. So, scanner will output code as press
numeric keypad when it read numeric digit. (The keypad
is in the right side of keyboard, and Num Lock control key
is also on.) If Alt+Keypad is selected, Caps Lock and
output will be independent.
Option Bar Code Option Alphanumeric
Entry
Program
To Next Page
Loading...
