23
Exit
Wand Emulation ( 8310/8312
except )
Bar/space polarity:
High/low- Black will be transmitted as a high voltage
level (+5) and space as low level (0V).
Low/high- Black will be transmitted as a low voltage level
(0V) and space as high level (+5).
Initial polarity: You must make sure what is Initial
polarity of your wand decode device in stand-by (idle). So,
initial signal state as a High voltage level (+5) or Low
voltage level (0V).
Option Bar Code Option Alphanumeric
Entry
Bar/space polarity
High/low
Low/high
00
＊
01
Initial polarity
Low
High
00
＊
01
Program
To Next Page
Loading...
