53
Code 39
Insertion group selection: Refer to Insertion group
selection of UPCA.
Format: The Full ASCII Code-39 is an enhanced set of
Code-39 that is the data with total of 128 characters to
represent Full ASCII code. It is combined one of the
digits +, %, $ and/ with one of the alpha digits (A to Z).
Append: This function allows several symbols to be
concatenates and be treat as one single data entry. The
scanner will not transmit the embedded appending code
(space for Code-39). If Enable and other symbols were
read again with the appended code, then codes will be
transmitted without Code ID, Preamble and Prefix. When
a symbol was decoded without the appended code, the
data will be transmitted without Code ID and Prefix, but
the Postamble Suffix codes are appended. This function
is used when the first number of code 39 is a space.
Example: □123456.
Start/end transmission: The start and end characters of
Code-39 are“★”. You can transmit all data digits
including two “★”.
Option Bar Code Option Alphanumeric
Entry
Insert group
00-44 00-44
00
＊
Program
To Next Page
Loading...
