32
Indication
Power on alert: After power-on the scanner it will
generate an alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED
above the scanner will light up to indicate a good barcode
reading.
Beeper indication: After each successful reading, the
scanner will beep buzzer to indicate a good barcode
reading, and its Beep loudness, Beep tone freq. and
Beep tone duration are adjustable.
Beep loudness/Beep tone freq./Beep tone duration:
You can adjust Beep Loudness, Beep tone and Beep
duration for a good reading upon favorite usage.
Exit
To Next Page
Loading...
