30
Global min. code
length
Scan
Inverted image scan: Set Enabled the scanner will scan
both black/white barcode with white/black background.
CTS trigger: This operation enabled an external device to
control scanning. The CTS trigger is controlled by apply
an external trigger signal to the CTS input. When active,
this signal causes scanning to begin as the scanner’s
trigger was depressed.
Power saving: Place the scanner in a idle state during
idle priced to optimize power usage.
Position indication(8110except): This function can
indicate the specific location before scanning. You can
also set up the time of indication.
Option Bar Code Option Alphanumeric
Entry
Global max.code length
00-63 04-63
63
＊
Disable
Enable
00
＊
01
Program
To Next Page
Loading...
