Why is the moisture content displayed not correct on my METER Measuring Instruments?
The displayed moisture content may be incorrect if the selected model is not appropriate for the product being tested. Try toggling through the available models to find a more suitable one. If the model is correct but still gives incorrect moisture content values, consider generating a new model for the product or updating an existing model.
What to do if verification is not correct on METER Measuring Instruments?
If verification is not correct, start by cleaning the sample chamber and components as described in Section 6. If verification is still incorrect after cleaning, perform a linear offset adjustment.
Why are the readings slow or inconsistent on my METER Measuring Instruments?
Slow or inconsistent readings on your METER Measuring Instruments can occur due to several reasons. The sample chamber might be dirty, so refer to Section 6 for directions on cleaning the sample chamber. The temperature difference between the sample and the block chamber may be too great; the sample must equilibrate to instrument temperature before a fast and accurate reading can be made. Also, some products absorb or desorb moisture very slowly, and in this case, nothing can be done to speed up the process.
Crucial safety instructions and warnings for operating the instrument.
Contact information and hours for METER Customer Service Representatives.
Detailed technical specifications of the AquaLab TDL instrument.
Detailed explanation of the Tunable Diode Laser measurement principle.
The role of temperature in AquaLab measurements and its advantages.
Detailed explanation of water activity as a measure of water status.
Explanation of water potential and sorption isotherms related to water activity.
List of items included in the AquaLab package for initial setup.
Step-by-step instructions for initial instrument setup and power-on.
Description of the main measurement and configuration screens and their functions.
Options for user management, security, and handling stored measurement data.
Detailed multi-step cleaning process for the instrument's components.
Steps to verify the instrument's calibration after cleaning.
How to verify the instrument's water activity readings using standards.
Detailed steps for verifying and adjusting the instrument's calibration.
Guidelines for preparing samples for measurement.
Step-by-step guide to performing a water activity measurement.
How the AquaLab measures moisture content using water activity and isotherm models.
Details and use of the AquaLink 4 software for data collection.
Instructions for using terminal programs to communicate with the AquaLab.
Guide to identifying and resolving common instrument problems.
Information on obtaining technical support and servicing the instrument.
Instructions for preparing saturated salt solutions for calibration.
Appendix B containing temperature correction data for verification standards.
General| Brand | METER |
|---|---|
| Model | AQUALAB TDL |
| Category | Measuring Instruments |
| Language | English |
To Next Page
