METREL MI 3295 - 6.6 Settings; 6.6.2 Initial Settings

MI 3295 Step Contact Voltage Measuring System MI 3295S Station operation
22
6.6 Settings
Different instrument options can be set in the SETTINGS menu.
Options are:
 Selection of language
 Setting the instrument to initial values
 Setting the output power of the
generator
 Setting the alarm
 Recalling and clearing results
 Setting date and time
 Selection of length unit (m, ft)
Figure 6.5: Options in Settings menu
Keys:
Cursor UP / DOWN
Selects appropriate option.
TEST
Enters selected option.
ESC
Exits back to main function menu.
6.6.1 Language
Same as in MI 3295M – see chapter 5.4.1 Language.
6.6.2 Initial settings
Selecting this option will allow the user to reset
the instrument settings and measurement
parameters and limits to the initial (factory)
settings.
Figure 6.6: Initial settings screen
Keys:
Cursor LEFT / RIGHT
Selects Yes or No
TEST
Restores default settings (if Yes is selected)
ESC
Exits back to Settings main menu without changes.
Initial settings are:
Instrument setting
Default value
Contrast
Default value
Language
English
Alarm
Disabled
Power Range
100%
Length units
m
Distance ‘a’
2.0 m