METREL MI 3295 User Manual

MI 3295 Step Contact Voltage Measuring System Preface
5
1 Preface
Congratulations on your purchase of the measuring system from METREL.
The Step Contact Voltage Measuring System consists of Station (MI 3295S) and Meter (MI
3295M) and is intended for the following tests and measurements:
 Step voltage
 Contact/Touch voltage
 Potential
 Earth resistance
 Specific earth resistance
 Current
The instrument is equipped with all the necessary accessory for comfortable testing. The
PC SW Metrel ES Manager enables uploading structure, downloading of results, storing of
results and making test reports.
Some measuring system highlights:
 Graphic LCD displays on Meter and Station.
 Autonomous Step / Contact/Touch Voltage Meter(s).
 Potential measurement with adjustable step length (straight line method).
 TRMS, 50 Hz, 55 Hz and 60 Hz clamp current measurement.
 Over 1000 memory locations in data flash memory for storing test results &
parameters.
 USB and RS232 ports on Meter for communication with PC.
 Synchronization between Meter and Station.
 Large test current of up to 50 A.
 Stable and accurate results due to a DSP measuring system.
 Fully compatible with new Metrel ES Manager PC software.

METREL MI 3295 Specifications

General

Brand	METREL
Model	MI 3295
Category	Measuring Instruments
Language	English