METREL PV Remote WL User Manual

A 1785 PV Remote WL Safety and operational considerations
7
1.3 Standards applied
The instrument is manufactured and tested according to the following regulations, listed
below.
Electromagnetic compatibility (EMC)
EN 61326-1
Electrical equipment for measurement, control and laboratory use -
EMC requirements Part 1: General requirements
EN 61326-2-2
Electrical equipment for measurement, control and laboratory use -
EMC requirements Part 2-2: Particular requirements - Test
configurations, operational conditions and performance criteria for
portable test, measuring and monitoring equipment used in low-
voltage distribution systems
Safety (LVD)
EN 61010-1
Safety requirements for electrical equipment for measurement, control,
and laboratory use Part 1: General requirements
Functionality
EN 62466-1
Photovoltaic (PV) systems. Requirements for testing, documentation
and maintenance Part 1: Grid connected systems Documentation,
commissioning tests and inspection
EN 62466-2
Photovoltaic (PV) systems. Requirements for testing, documentation
and maintenance. Grid connected systems. Maintenance of PV systems
Note about EN and IEC standards:
❑ Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.

METREL PV Remote WL Specifications

General

Brand	METREL
Model	PV Remote WL
Category	Measuring Instruments
Language	English