4.6 Configuration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28
￭￭￭￭￭￭￭￭
860 KF Thermoprep
in addition to switching the gas flow on and off. Furthermore it is still pos-
sible to modify the brightness of the display.
Selection
off | on
Default value
off
Temp.corr
Temperature correction. The target value for the temperature control of
the oven can be influenced with this correction value. A temperature dif-
ferential between the oven module and the sample in the vessel can thus
be brought into line as needed.
Range
-10 ... 10 °C (Increment: 1)
Default value
0 °C
The determination of the necessary temperature correction can be accom-
plished with a special oven insert and should be performed by a service
technician. Contact your responsible Metrohm supplier.
To Next Page
Loading...
Need help?
General
