￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Performing a determination
860 KF Thermoprep
￭￭￭￭￭￭￭￭
35
Starting the sample determination
1
Start the determination by pressing the [Start] key on the KF titrator.
2
Use both hands to move the guide head of the 860 KF Thermoprep
upward while pressing the fixing lever.
Refer to the illustrations on pages 31 ff.
3
Remove the blank from the oven with the crimping tongs.
Note
Caution! The vessel is hot.
4
Place the sample vessel into the oven using the crimping tongs.
5
Use both hands to move the guide head downward and insert the
needle into the sample vessel.
Waiting for the determination
1
Wait until the determination is finished. Conditioning will then be
resumed automatically.
2
Repeat the determination with the next blank.
To Next Page
Loading...
Need help?
General
