Metrohm 913 - Page 60

4.7 Menu dialogs
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50
￭￭￭￭￭￭￭￭
912/913/914 Meter
￭ etc.
Additional sensors entered by the user.
Sensor name
Editing dialog for changing the sensor name.
Sensor type
Display field for the sensor type.
￭ pH electrode
￭ Conductivity
￭ Metal electrode
￭ Oxygen sensor
￭ Temp. sensor
￭ Other sensor...
Order number
Editing dialog for entering/modifying the Order number.
Only displayed for iTrodes and Oxygen sensor.
Serial number
Editing dialog for entering/modifying the Serial number.
Only displayed for iTrodes and Oxygen sensor.
DO
Order no. cap
Editing dialog for entering/modifying the Order no. cap.
DO
Serial no. cap
Editing dialog for entering/modifying the Serial no. cap.
DO
Firmware mod-
ule
Display field indicating the firmware version of the oxygen sensor.
pH
Slope Editing dialog for entering/modifying the Slope.
￭ Default value: 100.00 / input range: 0.10 - 990.00%
pH
pH(0) Editing dialog for entering/modifying pH(0).
￭ Default value: 7.000 / input range: –99.999 - +99.999
K
Cell constant Editing dialog for entering/modifying the Cell constant.
￭ Default value: 1.00 /cm / input range: 0.001 - 500.0 /cm
Calibration
temp.
Display field indicating the temperature in °C from the last calibration.
K
Reference temp.
Display field indicating the reference temperature in °C.
K
Temp. compens. Display field indicating the value for temperature compensation of the last cali-
bration.
￭ Default value: 2.07%/°C / input range: 0.00 - 9.99%/°C