Metrohm Combustion-IC-System - Figure 3 Sequence of the Determination

2.1 The Combustion IC system
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4
￭￭￭￭￭￭￭￭
Combustion-IC-System
Start determination
(CIC system)
Rinse absorber tube and
provide absorber solution
(920 Absorber Module)
Sample input
(Combustion Module)
Rinse c apillary f. combustion
gases w. absorber solution
(920 Absorber Module)
Absorption of
combustion gases
(920 Absorber Module)
optional: Water infeed
(920 Absorber Module)
Combustion
Fill loop with
absorption solution
(920 Absorber Module)
Matrix elimination
(930 Compact IC Flex)
Re-rinse absorber tube
(920 Absorber Module)
IC determination
(930 Compact IC Flex)
Combustion Module (AJ)/
Combustion Oven (TEI)
Combustion Module (AJ)/Combustion Oven (TEI)
Figure 3 Sequence of the determination
NOTICE
Do not mix these up!
￭ Absorber solution: e.g. H
2
O
2
solution for oxidizing sulfur oxides.
￭ Absorption solution: Combustion gases dissolved in the absorber
solution.
The determination is controlled entirely by MagIC Net. You can find a
detailed description of the sequence in the online help for MagIC Net
under the title "Combustion sequence".