Metrohm Combustion-IC-System - Connecting the LPG;GSS Module

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
Combustion-IC-System
￭￭￭￭￭￭￭￭
23
NOTICE
The process for connecting the respective instruments to a computer or
a power supply is described in the respective manuals:
￭ 930 Compact IC Flex manual.
￭ 920 Absorber Module manual.
￭ Combustion Module (AJ) operating instructions (on the accompany-
ing CD).
￭ Autosampler MMS 5000 (AJ) operating instructions (on the accom-
panying CD).
￭ LPG/GSS Module (AJ) manual (on the accompanying CD).
￭ Combustion Oven (TEI) manual (on the accompanying USB flash
drive).
￭ Liquid Autosampler CIC (TEI) manual (on the accompanying USB
flash drive)
￭ Solid Autosampler CIC (TEI) manual (on the accompanying USB flash
drive).
￭ GLS Sampler CIC (TEI) manual (on the accompanying USB flash
drive).
3.7 Connecting the LPG/GSS Module
The LPG/GSS Module is used for feeding gaseous samples to the Combus-
tion Module.
The LPG/GSS Module can be connected to the Combustion Module in two
ways:
￭ Connection to the ABD
See the manual for the LPG/GSS Module for instructions
￭ Connection directly to the inlet of the combustion tube
Connecting the LPG/GSS Module to the combustion tube
Prerequisites
￭ The Combustion Module and the LPG/GSS Module have to be
switched off.
Accessories
￭ Oven coupling for LPG/GSS (6.730.4030)
1
Disassemble the individual components of the adapter.