Metrohm Combustion-IC-System - Introduction; The Combustion IC System; Overview; Figure 1 Detectable Elements

2.1 The Combustion IC system
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2
￭￭￭￭￭￭￭￭
Combustion-IC-System
2 Introduction
2.1 The Combustion IC system
2.1.1 Overview
Combustion is a sample preparation technique that uses burning to digest
a sample. Solid, liquid and gaseous samples that are flammable can be
digested using combustion. Combustion IC is particularly suited for deter-
mining the following elements:
Figure 1
Detectable elements
An additional instrument is required for the determination of gaseous
samples: the LPG/GSS Module (AJ) (2.136.0720) or the GLS Sampler CIC
(TEI) (2.0136.0630).