￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Introduction
Combustion-IC-System
￭￭￭￭￭￭￭￭
3
2.1.2 System description
Figure 2 Overview – CIC system
The sample is combusted in the Combustion Module (AJ) / Combustion
Oven (TEI).
The gases generated during combustion are dissolved into an absorber
solution in the 920 Absorber Module and are optimized for analysis using
suitable sample preparation techniques.
In the end, the absorption solution is preconcentrated in an ion chromato-
graph and analyzed.
The entire process is controlled and monitored using MagIC Net software.
The analysis data is saved in the software's database.
2.1.3 Sequence of a determination
A determination in the Combustion IC system runs according to the fol-
lowing diagram:
To Next Page
Loading...
