Metrohm Combustion-IC-System - Dosino for the Absorber Solution; Connecting the Ports - Overview; Figure 6 Connect the Dosino for the Absorber Solution

3.3 Dosino for the absorber solution
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
Combustion-IC-System
Next steps
Connect
capillary/
tubing at
port …
… to
1 Metrosep I Trap 1 - 100/4.0 (6.1014.200) trap column inlet
2 Water bottle
3 T connector (6.1808.060)
4 Combustion oven inlet (see chapter 3.6.1, page 16)
You can find detailed instructions in the manual for the 920 Absorber
Module.
3.3 Dosino for the absorber solution
3.3.1 Connecting the ports – Overview
Figure 6
Connect the Dosino for the absorber solution