Metrohm Combustion-IC-System - Page 30

3.7 Connecting the LPG/GSS Module
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24
￭￭￭￭￭￭￭￭
Combustion-IC-System
1
Protective sleeve
2
FAST connector
3
Plastic sleeve
4
Injection needle
2
Attach the FAST connector to the inlet of the combustion tube.
3
Attach the plastic sleeve to the FAST connector.
4
Insert the injection needle into the FAST connector.