MG ZS - Positioning the Jack; Fitting the Spare Wheel

EMERGENCYINFORMA TION
PositioningtheJack
NEVERworkbeneaththecarwiththejack
astheonlymeansofsupport.Thejackis
designedforwheelchangingonly!
NEVERjackthecarusinganyjackingpoints
otherthanthejackingpoints.Serious
damagetothecarcouldresult.
Avoidaccidentalcontactwithanyunderbody
parts,especiallyhotexhaustsystem
components.
Positionthejackonrmlevelgroundunderthejacking
pointnearestthewheeltoberemoved.Notethatthe
domedheadofthejackmusttintothecorresponding
recessinthesillplate(Thereisatriangleindicatorinthe
areashownbythearrowhead.Seetheillustrationabove).
T urningthejackscrewbyhand,adjustthejackuntilthejack
headtssnuglyontothesillinthecorrectarea.Ensurethat
thebaseofthejackisinfullcontactwiththelevelground.
FittingtheSpareWheel
Regularlycheckthesparewheeltyre
pressure,itmaynotbeusedforlong
periodsoftime.Aftertment,attherst
opportunitycheckandadjustthetyre
pressure.
Thewheelboltsmustbetightenedtothe
speciedtorqueafterchangingawheel
(115 ～ ～
～
130Nm).
233
5