MG ZS - Rear Stop;Tail Lamp Bulb Renewal; 1.5 L Engine Compartment

EMERGENCYINFORMA TION
RearStop/T ailLampBulbRenewal
1Openthetailgate.
2Disconnectthebatterynegativeterminal.
3Usingasuitableprybarorlever,carefullyreleaseand
removethesecuringscrewcovertrim.
4Usingasuitable10mmspanner/socketwrench,
removethe2screwssecuringthelamptothebody.
5Releasethelampassemblyandremoveawayfromthe
body.
6Rotatethebulbholder(1)inananti-clockwise
direction.
7Removebulbholderandremovebulb.
8Fitbulbtobulbholder.
9Insertbulbholderinlampassembly,rotateclockwise
untilfullysecure.
10Ensurelampsealiscorrectlylocated.
11Positionlamptobody,startbothscrewxings,tighten
to3-5Nm.
12Retscrewcovertrim.
13Reconnectbatterynegativeterminal.
14T estlampoperation.
15Closetailgate.
247
5