MICRO-EPSILON optoCONTROL CLS-K-10 - Technical Data; Models CLS-K-10 up to -51

Page 12
Functional Principle, Technical Data
optoCONTROL CLS-K
2.5 Technical Data
2.5.1 Models CLS-K-10 up to -51
Model CLS-K- 10 11 20 30 31 40 50 51
Operating voltage VDC 10 - 30 10 - 30 24 10 - 30 10 - 30 24 10 - 30 10 - 30
Residual ripple ≤ 10 %
Current consumption ~ 50 mA
Switching delay ≤ 500 ms
Response time ≤ 120 μs
Switching frequency ≤ 4 kHz
Temperature drift ≤ (-)0.5 % /K
Reproducibility ≤ 1 % at ∆ϑ = 2 K
Switching state LED display red and green
Operating mode
Light and dark
switch output
Light/dark switching switchable
Sensitivity Adjustable with 10-turn potentiometer P1
Range switching S1 1:100 (Short range : Long range)
Hysteresis 4 % of the measuring value range
Protection class IP 65 (with mounted fiber optics)
Operating temperature 0 up to +50 °C (+32 ... +122 °F)
Storage temperature -25 °C up to +70 °C (-13 ... +158 °F)
Housing material Macrolon 8030/UL94V1, transparent cover, blue lower part
Weight, dimensions approx. 215 g / 135 g, 125 x 42 x 45 mm
Switching output
Transistor
1
2x NPN O.C.
Relays 1x
change-
over
contact
Optocou-
pler
1
PNP
1
Relays 1x
change-
over
contact
Optocou-
pler
1
PNP
1
Switching voltage
30 VDC 0.01-250
VAC 0.01-
220 VDC
30 VDC 30 VDC 0.01-250
VAC 0.01-
220 VDC
30 VDC 30 VDC
1) Short-circuit proof