MICRO-EPSILON optoCONTROL CLS-K-10 - 4 Mounting

Page 16
Mounting
optoCONTROL CLS-K
4. Mounting
No sharped edged or heavy articles may affect on the cables. In any case, avoid definitely kinking of the
cables.
> Damage or destruction of the cable, failure of the sensor
88 (3.46)
60 (2.36)
31 (1.22)
14
(.55)
30 (1.18)
PG 13.5Connection
fiber optics
Bore hole for mounting
(for M5 screw)
42 (1.65)
Height: 45 mm
(1.77)
7 (.28)
Fig. 3 Dimensional drawing of optoCONTROL CLS-K, dimensions in mm, not to scale
NOTICE