Page 7
Safety
optoCONTROL CLS-K
1.4 Proper Use
The optical fiber amplifier series CLS-K are optical sensors. These are used with the additional use of fiber
optics for optical and non-contact recording of a diameter, edge, gap and the presence of a part during
- measuring and inspection tasks
- position detection of small parts
- position and mounting control on assembly machines and feeding systems
- presence monitoring
- length and diameter control
The system may only be operated within the limits specified in the technical data, see Chap. 2.5.
Use the system in such a way that in case of malfunctions or failure personnel or machinery are not endan-
gered.
Take additional precautions for safety and damage prevention for safety-related applications.
To Next Page
Loading...
