Micromeritics GEOPYC 1365 - Print or Export Records

PRINT OR EXPORT RECORDS
The printer must first be attached to the analyzer via aUSB port.
EXPORT AS A .ZIPFILE TO A USBDEVICE:
This functionality is only available locally. If performed remotely, the download occurs
through the browser.
Exports are done in XML format only. Verify that the USBdevice does not contain a
GeoPyc.conf file. If it does, then set the following in the file:
InstallApplication = NO
DownloadApplication = NO
If these items are not set, this error message occurs:
Failed to save because USB has been ejected or is absent.
1. Insert the USB device into a USBport on the analyzer.
2. Tap Records on the menu.
3. Select one or more records to export.
4. Tap the download icon. Agreen success message displays upon successful download:
Successfully saved to <USB-location>.zip. Please remove USB.
Print or Export Records
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
3 - 3