Micromeritics GEOPYC 1365 - 4 SOP (Standard Operating Procedures)

4 SOP (STANDARD OPERATING PROCEDURES)
Use to define analysis conditions.
Field or Button
Description
Analysis Type
The type of analysis.
Last Modified
The date and time the record was last modified.
Method
Method used to run the analysis.
Name
Description of the analysis.
Toolbar
Tap to create a new procedure.
Use to select or deselect record.
Deletes the selected file from the list. Tap the box to the left of
the record to enable it, then tap the Delete icon to delete the
record.
Tap to open and modify the selected record.
Copies the selected record.
SOP Fields and Buttons Table
4 SOP (Standard Operating Procedures)
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
4 - 1