Micromeritics GEOPYC 1365 - Clean the Analyzer

Field or Button
Description
Model
Analyzer model.
Name [textbox]
The name of the analyzer (ie., lab number, etc.).
NTP [button]
By default, the applications use UTP to set the clock and display times
and dates. If a different timezone is preferred, enable NTPand select a
timezone in the Timezone field.
The current date and time can also be provided by completing the
Current time field.
Position Unit [button]
Select if the plunger and chamber assembly should be measured in
mm or counts.
Save [button]
Saves changes.
Serial Number
Serial number of the analyzer.
Software Version
Version of the installed application.
Timezone
[drop-downbox]
By default, the applications use UTP to set the clock and display times
and dates. If a different timezone is preferred, enable NTPand select a
timezone in the Timezone field.
The current date and time can also be provided by completing the
Current time field.
Maintenance Fields and Buttons Table (continued)
CLEAN THE ANALYZER
The exterior casing of the analyzer may be cleaned using a clean cloth dampened with isopropyl
alcohol (IPA), a mild detergent, or a 3% hydrogen peroxide solution. Do not use any type of abrasive
cleaner.
l Do not allow liquid to penetrate the casing of the analyzer. Doing so could result in
damage to the unit.
Clean the Analyzer
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
6 - 3