Micromeritics GEOPYC 1365 - Reports; Blank Report

REPORTS
A report is available after analysis if the analyzer is setup to print or transmit data. Analysis reports
remain active while an automatic analysis is in progress.
BLANK REPORT
Field or Button
Description
Chamber &Medium
Mass
Mass of the chamber and medium.
Chamber Diameter
Diameter of the chamber used in the analysis.
Completed
Date and time the analysis was completed.
Conversion Factor
Conversion factor used in the analysis.
Cycle #
Cycle number of the analysis.
Displacement
Displacement value for the cycle.
Instrument
Analyzer used in the analysis
Operator
Person running the analysis.
Blank Data Fields and Buttons Table
Reports
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
3 - 5