5 Instrument
Field or Button
Description
Move in all the way to the left.
Build force, This button is disabled when the plunger is at the max-
imum limit switch.
Send the plunger assembly to the Home position.
Force
Plunger force.
Position
Plunger position.
Target Force
Set the target force of the plunger. Changes to this field occur immediately
even if the plunger is in motion.
Target Speed
Set the speed of the plunger. Changes to this field occur immediately even if
the plunger is in motion.
Manual Control (continued)
5 - 2
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016
To Next Page
Loading...