Micromeritics GEOPYC 1365 - Page 8

Instrument Log Report 3 - 12
Zero Depth Listing Report 3 - 13
4 SOP (Standard Operating Procedures) 4 - 1
Add a New Procedure 4 - 2
Consolidation Cycles 4 - 5
Consolidation Force 4 - 6
5 Instrument 5 - 1
Chamber and Plunger 5 - 3
Handling the Chamber and Plunger 5 - 3
Remove Chamber and Plunger 5 - 4
Insert Plunger 5 - 4
Mount the Chamber and Plunger 5 - 5
Chamber Diameter 5 - 6
6 Maintenance 6 - 1
Clean the Analyzer 6 - 3
Plunger Assembly Maintenance 6 - 4
Plunger Assembly 6 - 4
Check Plunger Seal 6 - 4
Replace Plunger Piston 6 - 5
Power Analyzer On and Off 6 - 6
Refresh the Browser 6 - 7
Troubleshooting 6 - 8
7 Dry Flo 7 - 1
How to Handle Dry Flo 7 - 1
Amount of Dry Flo to Use 7 - 2
Weigh Dry Flo 7 - 4
Dry Flo Bed 7 - 5
A Conversion Factor A - 1
vi
GeoPyc 1365 Operator Manual
136-42800-01 (Rev -) — Dec 2016