Micron Electronics, Inc. 2-3
Chapter 2: Technical Information
Memory
The ClientPro 766Xi/Xe system board has SDRAM arranged in three sockets,
which provide 384MB maximum memory using on-board DIMMs. This section
explains the type of DIMMs supported, lists the rules of adding memory to
the system, gives some examples of common memory configurations, and
shows how to install the new DIMMs.
The ClientPro 766Xi/Xe supports the following 168-pin DIMMs (3.3V only):
Non-ECC config. ECC config.
8MB (1Mbitx64) (1Mbitx72)
16MB (2Mbitx64) (2Mbitx72)
32MB (4Mbitx64) (4Mbitx72)
64MB (8Mbitx64) (8Mbitx72)
128MB (16Mbitx64) (16Mbitx72)
The following is a list of rules to follow when upgrading DIMMs. If you follow
these rules, your upgrade should be trouble free:
o Refer to the section entitled "DIMM Modules" on page 2-10 for
more information on upgrading your memory.
o Questions and purchases for memory expansion may be directed
to Micron Memory Module sales (1-800-438-3343).
To Next Page
Loading...