Micron ClientPro 766Xi - Exiting;Saving the CMOS Selections

3-26 Micron Electronics, Inc.
Micron ClientPro 766Xi/Xe User’s Guide
Exit Saving Changes
Exits Setup and saves the changes in CMOS RAM. You can also press the
<F10> key anywhere in the Setup program to do this.
Exit Discarding Changes
Exits Setup program without saving any changes. This means that any changes
you have made while in Setup are discarded and not saved. Pressing the
<Esc> key in any of the four main screens will also exit and discard changes.
Load Setup Defaults
Returns all of the Setup options to their defaults. The default Setup values are
loaded from the ROM table. You can also press the <F9> key anywhere in
Setup to load the defaults.
Exiting/Saving the CMOS Selections
This section describes how to exit Setup with or without saving the changes
you have made.
Figure 3-19. CMOS Exit Screen