4-10 Micron Electronics, Inc.
Micron ClientPro 766Xi/Xe User’s Guide
Problem
Read/write, sector, data, or seek errors occur when attempting to
access files on the hard drive.
Possible Cause
o The format may be fading.
o The hard drive may be developing media errors.
o The file allocation table may be corrupted.
Solution Checklist
o Using a file-by-file backup method, backup as much data as you
can, then reformat the drive. If the format is successful, use a
disk diagnostic software application to test the media of the drive
(make sure the application locks out any errors it finds to make
them inaccessible from DOS). Finally, restore your files from the
backup tape or diskettes.
To Next Page
Loading...