Microscan MS-4 - Focal Distance Table (Read-Only)

MS-4 Imager User’s Manual 10-19
Camera and IP Setup
Focal Distance Table (Read-Only)
Number of Focal Distances
Focal Distance
Definition: Specifies the number of focal distances supported by the Imager (1).
Serial Cmd: <K526,number of focal distances,focal distance>
Default: 1
Options: N/A (Focal Distance is factory preset.)
Definition: Returns the Imager’s factory preset focal distance.
Serial Cmd: <K526,number of focal distances,focal distance>
Default: Returns the Imager’s factory preset Focal Distance value.
Options: N/A