Need help?Do you have a question about the Microscan MINI Hawk and is the answer not in the manual?
Lists necessary hardware components and their part numbers for initial setup.
Provides instructions for physically connecting the imager to the host system and power.
Explains how to orient the imager and symbol for optimal reading and alignment.
Details the process of installing the Easy Setup Program (ESP) software on the host computer.
Guides the user through selecting the correct communication protocol and establishing a connection.
Describes the automatic calibration routine to optimize symbol decoding performance.
Introduces the basic EZ Mode interface for initial positioning, testing, and calibration.
Describes how to configure communication parameters for the imager using the ESP software.
Details the configuration settings for the host port, including baud rate, parity, stop bits, and data bits.
Covers the USB HID interface, report types, and communication protocols for USB connections.
Explains the autocalibration process and its five phases for optimizing performance.
Describes the ESP interface for optimizing imager performance through detailed calibration adjustments.
Guides users on how to configure read cycle parameters using the ESP software interface.
Details the functionality and programming of the imager's EZ Button for various operations.
Explains how to perform and interpret read rate tests using ESP or serial commands.
Explains how to set up and manage the master symbol database for Matchcode operations.
Details the process for updating and verifying the imager's firmware.
Describes methods for resetting settings to default or saving current configurations.
General| Model | MINI Hawk |
|---|---|
| Scanning Technology | Laser |
| Interface | USB, RS-232, Keyboard Wedge |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Scan Rate | 100 scans per second |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Certifications | CE, FCC, RoHS |
| Decode Capability | 1D |
| Humidity | 5% to 95% non-condensing |
| Light Source | Laser |
| Power Supply | 5V DC |
To Next Page
