MINI Hawk High Performance Imager User’s Manual 9-11
Matchcode
Mismatch Replace
Replacement String
Important:
The ASCII characters
<
,
>
, and
,
can only be entered as hex pairs:
For <: <K736h,,3C>
For >: <K736h,,3E>
For
, : <K736h,,2C>
See ASCII Character Entry Modifier on page 3-32 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: Provides a convenient shortcut for applications that need to output a
predefined text string whenever a symbol does not match a master
symbol.
Definition: Outputs a user-defined data string whenever a mismatch occurs and
Matchcode is enabled.
Serial Cmd: <K736,status,replacement string>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Definition: User-defined data string that, when enabled, replaces symbol data
whenever a mismatch occurs.
Serial Cmd: <K736,status,replacement string>
Default: MISMATCH
Options: An ASCII string up to 64 characters.
To Next Page
Loading...
