MS-4 Imager User’s Manual 10-27
Camera and IP Setup
Mirrored Image
Regular Image
When Regular Image is enabled, images will be processed as they appear upon capture.
Mirrored Image
When Mirrored Image is enabled, images will be processed as a reverse of the captured
image.
Both
When Both is enabled, regular and mirrored images will be processed.
Usage: Enable this setting when the Imager is viewing a mirrored image (as
when it is being used with a right-angle mirror attachment).
Definition: When enabled, outputs a mirrored image of the symbol.
Serial Cmd: <K514,mirrored image>
Default: Both
Options: 0 = Regular Image 1 = Mirrored Image
2 = Both (auto-detect
normal/mirrored)
To Next Page
Loading...
